I did the performance test a year ago when I ordered this VPS. Vultr Intel High Frequency VPS

Now I did a test again.

davidyin@Hemlock:~$ wget -qO- yabs.sh | bash
# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
# Yet-Another-Bench-Script #
# v2023-04-23 #
# https://github.com/masonr/yet-another-bench-script #
# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #

Sun Jun 4 06:02:54 PM PDT 2023

Basic System Information:
---------------------------------
Uptime : 5 days, 2 hours, 19 minutes
Processor : Intel Core Processor (Skylake, IBRS)
CPU cores : 1 @ 3791.998 MHz
AES-NI : ✔ Enabled
VM-x/AMD-V : ❌ Disabled
RAM : 969.4 MiB
Swap : 3.1 GiB
Disk : 29.9 GiB
Distro : Ubuntu 22.04.2 LTS
Kernel : 5.15.0-73-generic
VM Type : KVM
IPv4/IPv6 : ✔ Online / ✔ Online

IPv6 Network Information:
---------------------------------
ISP : The Constant Company
ASN : AS20473 The Constant Company, LLC
Host : Vultr Holdings, LLC
Location : Santa Clara, California (CA)
Country : United States

fio Disk Speed Tests (Mixed R/W 50/50):
---------------------------------
Block Size | 4k (IOPS) | 64k (IOPS)
------ | --- ---- | ---- ----
Read | 189.00 MB/s (47.2k) | 614.28 MB/s (9.5k)
Write | 189.50 MB/s (47.3k) | 617.52 MB/s (9.6k)
Total | 378.51 MB/s (94.6k) | 1.23 GB/s (19.2k)
| |
Block Size | 512k (IOPS) | 1m (IOPS)
------ | --- ---- | ---- ----
Read | 672.00 MB/s (1.3k) | 717.41 MB/s (700)
Write | 707.70 MB/s (1.3k) | 765.19 MB/s (747)
Total | 1.37 GB/s (2.6k) | 1.48 GB/s (1.4k)

iperf3 Network Speed Tests (IPv4):
---------------------------------
Provider | Location (Link) | Send Speed | Recv Speed | Ping
----- | ----- | ---- | ---- | ----
Clouvider | London, UK (10G) | 1.28 Gbits/sec | 1.63 Gbits/sec | 137 ms
Scaleway | Paris, FR (10G) | 1.97 Gbits/sec | 6.22 Gbits/sec | 140 ms
NovoServe | North Holland, NL (40G) | 1.23 Gbits/sec | 1.40 Gbits/sec | 143 ms
Uztelecom | Tashkent, UZ (10G) | 1.03 Gbits/sec | 2.49 Gbits/sec | 234 ms
Clouvider | NYC, NY, US (10G) | 2.73 Gbits/sec | 3.41 Gbits/sec | 68.7 ms
Clouvider | Dallas, TX, US (10G) | 5.39 Gbits/sec | 6.26 Gbits/sec | 34.4 ms
Clouvider | Los Angeles, CA, US (10G) | 3.69 Gbits/sec | busy | 8.28 ms

iperf3 Network Speed Tests (IPv6):
---------------------------------
Provider | Location (Link) | Send Speed | Recv Speed | Ping
----- | ----- | ---- | ---- | ----
Clouvider | London, UK (10G) | 1.28 Gbits/sec | 1.64 Gbits/sec | 137 ms
Scaleway | Paris, FR (10G) | 1.68 Gbits/sec | 5.27 Gbits/sec | 145 ms
NovoServe | North Holland, NL (40G) | 1.22 Gbits/sec | 1.42 Gbits/sec | 143 ms
Uztelecom | Tashkent, UZ (10G) | 791 Mbits/sec | 2.43 Gbits/sec | 234 ms
Clouvider | NYC, NY, US (10G) | 2.72 Gbits/sec | 3.41 Gbits/sec | 70.7 ms
Clouvider | Dallas, TX, US (10G) | 5.37 Gbits/sec | 6.37 Gbits/sec | 34.4 ms
Clouvider | Los Angeles, CA, US (10G) | 7.32 Gbits/sec | 8.18 Gbits/sec | 8.32 ms

Running GB6 benchmark test... *cue elevator music*
Geekbench 6 Benchmark Test:
---------------------------------
Test | Value
|
Single Core | 819
Multi Core | 498
Full Test | https://browser.geekbench.com/v6/cpu/1484305

YABS completed in 23 min 55 sec

Find the GeekBench 6 test result at https://browser.geekbench.com/v6/cpu/1484305

Vultr HFC

It is an updated test script. So the result is different from the old one.

When I compared these test results with my New VPS,   it is less powerful than the new one.

Geekbench 6 on Contabo

Single Core | 949
Multi Core | 2828

 

Geekbench 6 on Vultr

Single Core | 819
Multi Core | 498
One of the good news about Vultr VPS is the bandwidth. It has 2Gbit/s or even 8Gbits/sec speed. I believe Vultr has a 10Gbit connection for all VPS.  And also benefit from the NVMe storage.

David Yin

David is a blogger, geek, and web developer — founder of FreeInOutBoard.com. If you like his post, you can say thank you here

Leave a Reply

Your email address will not be published. Required fields are marked *