Ubuntu 7.10 on USB flash disk

| No Comments | No TrackBacks

I have some USB flash disks. I'd like to make it a bootable with Ubuntu 7.10.

Let me show you how to do it.

1. Grab the Ubuntu 7.10 ISO and burn it to a CD
2. Insert the CD and your USB flash drive
3. Reboot your computer into Ubuntu from the Live CD
4. Open a terminal window and type sudo su
5. Type fdisk -l to list available drives/partitions. Note which device is your flash drive (example: /dev/sda) Throughout this tutorial, replace x with your flash drive letter. For example, if your flash drive is sdb, replace x with b.
6. Type umount /dev/sdx1
7. Type fdisk /dev/sdx
* type p to show the existing partition and d to delete it
* type p again to show any remaining partitions (if partitions exist, repeat the previous step)
* type n to make a new partition
* type p for primary partition
* type 1 to make this the first partition
* hit enter to use the default 1st cylinder
* type +750M to set the partition size
* type a to make this partition active
* type 1 to select partition 1
* type t to change the partition filesystem
* type 6 to select the fat16 file system
* type n to make another new partition
* type p for primary partition
* type 2 to make this the second partition
* hit enter to use the default cylinder
* hit enter again to use the default last cylinder
* type w to write the new partition table
8. Type umount /dev/sdx1 to ensure the 1st partition is unmounted
9. Type mkfs.vfat -F 16 -n ubuntu710 /dev/sdx1 to format the first partition
10. Type umount /dev/sdx2 just to ensure the 2nd partition is unmounted
11. Type mkfs.ext2 -b 4096 -L casper-rw /dev/sdx2 to format the second partition
12. Remove and Re-insert your flash drive
13. Back at the terminal, type apt-get update
14. Type apt-get install syslinux mtools
15. Type syslinux -sf /dev/sdx1
16. Type cd /cdrom
17. Type cp -rf casper disctree dists install pics pool preseed .disk isolinux/* md5sum.txt README.diskdefines ubuntu.ico casper/vmlinuz casper/initrd.gz /media/ubuntu710/

Ignore any "cannot create symbolic link" errors

18. Type cd /home/ubuntu
19. Type wget pendrivelinux.com/downloads/U710fix.zip
20. Type unzip -o -d /media/ubuntu710/ U710fix.zip
21. Restart your computer, set your BIOS or Boot menu to boot from the USB device and reboot again.

You may get many ways to make a bootable Ubuntu flash disk. But the way I introduced is the most easiest.


Related Articles

No TrackBacks

TrackBack URL: http://www.yinfor.com/mtcgi/mt-t-1010.cgi/2089

Leave a comment

About this Entry

This page contains a single entry by David Yin published on March 3, 2008 3:24 PM.

Replac the fan of power supply unit was the previous entry in this blog.

Blackjack Club is the next entry in this blog.

Find recent content on the main index or look in the archives to find all content.

OpenID accepted here Learn more about OpenID
Powered by Movable Type 4.21-en

Online Tools