Philips Universal Remote Control

hey i tried to code my remote your way but without sucess i have a sharp t.v and if you could email me the codes for it that would be great

Hey!...Thanks a million for the instructions...was looking all over for them...had lost my manual aswell...
~cheers~

can u either tell me what the modle of the remote is orgive me the codes for a sony tv

I was trying to push the code search button after doing the search with the power button. Thanks a lot. I had to do an image search to find this.

I have the same remote, i have a Sanyo tv. i did not have success w/ your post, however i did have success before using the power button. But now it will not work now. So i would appreciate it if you could email me the codes for a "Sanyo Tv" thank you!

I will scan the full codes and post here later.

i cant find my code book for my universal remote, same one was pic on site of course. i tried your way..worked well, thank you.
i was unable to find the codes online. until i stumbbled on this page, so thanks.
guys after you keep pushing the channel up button, press it slowley, then hit mute like he/she says, up top, and it will work...if you keep pushing the channel button to fast, after it changes a channel, then stops working, you have to start all over again, push it kinda slwoely

THANK YOU THANK YOU THANK YOU!!!! I have been trying for a week to get my remote to program to my other TV!! 2 YO lost the remote and all i had was this one with no manual!!

Your link for the manual does not work I need the codes for a symphonic tv for this remote. Anyone?

_______________________________
Reply:
The link is fixed.
The code you need is 324 225 247 726

David Yin.

i try it but it doesn't work

how do i put the code

do you know the code for zenith Z tv

Willes,

Do you see my link to the menul of this remote control? All support equipment and codes can be found there.

yea i tied your method but my tv is stuck on TV/VCR with the display on so i cant see wen it changes channels i also have a Sanyo brand televison so if u could email me the codes or post them that woul be swell

Hey! Thank you sooooo much for this! I was going crazy looking for this code on the web! I threw out my manual thinking that I would never need it... a week later, I dropped my clicker and i needed to reprogram it! You saved me a bunch of time! Thanks again!!!!!!!!

How do u get it to work on a Samsung DVD player?

To Alicia,

Just follow the instruction above to search the code. or use my scanned manual to find the code you need.

my tv is stuck on TV/VCR with the display on so i cant see wen it changes channels i also have a Sanyo brand televison so if u could email me the codes or post them that would be so helpful..I'm going crazy!

I'm desperate!

Ty , i had problems but i finnally got it programmed awesome !

Dude you rock. I just moved in this apartment fully furnished in Halifax and I have this Tv with a Phillips universal remote that was deprogrammed and could not find the code. Every time I wanted to change the channel I had to get up to do it. That was until I found your site. You rock!!! Thanks

Thank you for this... much appreciated.

I am so happy that it can help so many people.

DOES ANYONE HAVE THE CODES FOR A SANYO TELEVISION, THANKS

Thank you very much i couldn't believe i came across ur page cuz i've been trying to figure out these codes all this morning. I would honestly recommend this website to anyone who is having remote problems becuz this website isn't trying to get u to buy a new remote it helps u work with the one u already have!!!!! THANKS>

Thank you sooooo much for providing this information. I replaced our remote with the same one(for our RCA TV). Since I didn't have the code, I tried your alternate method, and it works perfect. In fact, I've had to use this method several times now. I have your page bookmarked for easy reference.

I love this method so much, I am writing a post on my blog, pointing my readers to you.

Again, thank you

HELLO!! ii NEED THE CODES FOR A SANYO!! iiF YOU HAVE THEM ii WOULD GREATLY APPRECiiATE iiT!!

anybody know the code for a philips dvp 3040? I've tried everything with no luck.

Hey,
I need the code to program an RCA remote control for a Zenith Z TV. Any help would be appreciated.
Thanks :)

I did a search on the internet for codes and came upon your site. The instructions were perfect! I too lost my code book. The directions worked perfectly. Thank you, my remote is the same as the picture and it worked!

Thanks buddy that was helpful after I changed the batteries I was unable to locate the manual and your instructions helped me a lot. Thanks again.

i have a phonola television but i don't see it in the code list.did someone give it to me? i tried philips codes ,it work but i can't access to the search menu. help me please

Thanks so much, I tried all the websites and yours was definitely a BINGO!!!

Thanks again! Now I'll know what to do next time. It's amazing how we have to live with a remote!!!

This web site help me determine the proper entry codes for my VCR/DVD Comb and my TV. May help someone else : http://www.remotecodelist.com

yea it worked for me.... guys if it doesnt seem 2 work, but it changes channels sometimes, go slower because it takes3-6 seconds b4 the button actually works, also sometimes the tv controls work only partially, try again n again till u get everything... I MEAN EVERYTHING... 2 work... (took me 1h to do my dvd player, cable thing, and tv) THX MAN... btw yea i lost my book =D... well my mom did :p

does anyone have codes for a rca tv???

247 helped me with my sylvania, thanks

I have a symphonic tv can u e mail me the code ty

I tried David's method and I still could not get it to work-so I tried one thing different and it worked.Hope this helps for someone.Read below and note #5.

By David Yin on September 9, 2006 5:06 PM | Permalink | Comments (37) | TrackBacks (0)
I bought a new Philips Universal Remote Control at Wal-Mart this afternoon to replace the old RCA TV control.

The old one is still working except the volume up button. It is need 4 AAA batteries.
I tried my best to fix this button including open the controler and cleaning. All failed.

I saw the Universal Remote Control is about $9 with 3 devices, such as TV, VCR/DVD, Cable/Sat. This 3 devices controler has lowerst price. Some 4 or 5 devices may double the price.

When I install the batteries and try to search the code, firstly I did not success with the direct code entry.

It has a list of codes for different brand devices.

I have to try the second way by programming with code search. It is much easy.
1) Manually turn on the device (TV, DVD) to be controlled.
2) Press and hold code search button until the red indicator stays on. Release the code search button.
3) Press and release the desired mode button (TV, DVD,etc)
4) Press the Channel Up button repeatedly (up to 300 times) until the device to be controlled changes channel.
5) Press and release the Mute button to install the code.

Once at 5),I pressed the "enter" key instead of the "mute" and it worked instantly.Good Luck!

i lost my book and i need the code for a sony tv anyone might know let me know asap plz. i need my remote again thanks

IT WORKED!!! THANKS!!!! :D

Thanks so much for putting this online. I lost my manual and this worked perfectly! THANK YOU!

thank you soooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
much......i was once lost....now im found....

Thanks for the above instruction on programing. Have a Toshiba TV and DVD. Worked GREAT on programing the TV, but not the DVD. Any suggestions? Any help will greatly be appreciated.

Thanks,

Larry

thanks dog, your shit worked!

so what happens if i cant turn on the tv manually i have an RCA and we got the remote to work a couple times but everytime i take out the batteries it just stoppes working please help

Your suggestion worked. It will pay to count to yourself the clicks of the channel button if you want to go fast. If you do that, when you go past your spot when clicking...you can at least fly up to the pt on your next try and then slow down to keep from missing it. Thank you. This might work for other people. My tv was very old, that is probably why none of the codes worked from the site i have posted...it may work for others. good luck and thanks again.
www.universal-remote.net/philipsmagnavox.html

YOU ROCK!!! I don't know what I would have done with out this... I couldn't find anything helpful anywhere else online.

Dude, do you know to set up a Toshiba Tv. I lost my manual. I tried the code search, 300 times but it didn't work at all. please help me out.

Thanks so much! This worked great for our new Sony TV whereas the codes on the remote pamphlet did NOT work.

Thanks so much for this post. All those other codes didn't work at all. I'm never programming this remote again any other way than this :)